Dibawah ini adalah langkah sederhana menggunakan IQ Ultimate™ Patch Test Chamber

• Water resistant ( Tahan Air) – permits showering ( Dapat digunakan pada saat mandi)
• Elastic ( Elastik) – allows normal daily activities ( Memungkinkan pasien tetap malakukan aktivitas sehari-hari)
• Transparent (transparant)  – facilitates reading of the tests ( memudahkan pembacaan hasil test)

1. Break the perforation of the corner(s). If the Application Device (AP-P) is used: slide the IQ Ultimate™ unit into the device.	2. Pull back the tape gently until all chambers are revealed. Do not detach the tape from the plastic cover.	3. If the Application Device is used: attach the tape to the device by pressing the clip.
4. Apply the test preparations starting with the first hapten in the lower left chamber.  Lower left = upper left on the patient.	5. If the Application Device is used: detach the IQ Ultimate™ unit from the clip. Remove the unit from the device.	6. Remove the corner(s) and apply the unit onto the back. Press with the palms on the tape for about 5 seconds.
7. When all test units have been applied, remove the topliners with a gentle diagonal motion.	8. Mark, to the left of the tape, the first and the 5th chamber using theChemo Skin Marker.	9. After about 48 hours: Remove the patches with a rapid diagonal motion to minimize patient discomfort.